• 계약 4.0KW/H 4000LPD 해수 역삼투압 시스템
  • 계약 4.0KW/H 4000LPD 해수 역삼투압 시스템
  • 계약 4.0KW/H 4000LPD 해수 역삼투압 시스템
  • 계약 4.0KW/H 4000LPD 해수 역삼투압 시스템
계약 4.0KW/H 4000LPD 해수 역삼투압 시스템

계약 4.0KW/H 4000LPD 해수 역삼투압 시스템

제품 상세 정보:

원래 장소: 중국
브랜드 이름: Fenigal/OEM
인증: CE/NSF etc.
모델 번호: SWRO-250~9000LPH,5-10

결제 및 배송 조건:

최소 주문 수량: 1개 세트
가격: Negotiable
포장 세부 사항: 표준 수출 나무 나무상자 / 통 또는 벌거벗은 채 영화에 의해 감싸집니다
배달 시간: 15~30 일
지불 조건: 전신환, 웨스턴 유니온, 페이팔 기타 등등.
공급 능력: 달 당 50 세트
최고의 가격 접촉

상세 정보

기술: 역삼투 디자인: 미끄럼 탑재
회복율: 8~40% TDS에게 / ppm을 공급하세요: <42>
물 임시.: 5~35˚C PH: 4~9
용해 철 mg/L: <0> 재료: SS304/SS316L,carbon 강철
전압: 380V,415V,220V, 맞춤화될 수 있습니다 애플리케이션: 물 정화 동작, 정수기, 제약의, 식수, 식량
기능: 물 정화, 담수화 제어: 전자적, 설명서 / PLC
RO 막: 하이드러노틱스 또는 DOW,4040 펌프: 단포스 / CAT / CNP
하이 라이트:

4000LPD 해수 역삼투압 시스템

,

220V 해수 역삼투압 시스템

,

4000LPD 바다 정수장

제품 설명

계약 4.0KW/H 4000LPD 해수 역삼투압 시스템

Reverse Osmosis Sea Water Purification System Seawater Desalination Plant 300~6000GPD

4000lpd seawater desalination equipment:

 

1. Capacity: 4000L/D
2. Rated power: 4.0KW/H
3. Voltage: 110V/220V/380V, 50Hz/60Hz, single phase/3phase
4. Desalting rate:>=98%
5. Water recovery rate: 30-35%
6. TDS of raw water: ≤35000PPM
7. TDS of pure water: ≤750PPM

 

Seawater Desalination System Features:

* The design of the entire reverse osmosis seawater desalination control system is controlled by advanced computer programs at home and abroad, and a distributed sampling control and centralized monitoring operation control system is formed by the programmable controller PLC of the industrial computer operating station.
* Set high and low pressure protection switches and automatic switching devices according to process parameters. When abnormal conductance, flow and pressure occur, automatic switching, automatic interlocking alarm, and shutdown can be realized to protect high-pressure pumps and reverse osmosis membrane elements.
* Frequency conversion controls the start and stop of the high-pressure pump, realizes the soft operation of the high-pressure pump, saves energy consumption, and prevents damage to the high-pressure pump and membrane elements due to water hammer or back pressure. The program is designed to realize low-pressure automatic flushing before and after the reverse osmosis device is turned on and off.
* Especially during shutdown, the meta-stable state of concentrated seawater will transform to precipitate and pollute the membrane surface. Automatic flushing of low-pressure desalinated water can replace concentrated seawater for protection. The film surface is not contaminated, which extends the life of the film.
* The temperature, flow, water quality, output and other related parameters of the system can be displayed, stored, counted, tabulated and printed. The dynamic process flow screen in the monitoring operation is clear and intuitive, and the system control simplifies manual operations to ensure that the system can run automatically, safely and reliably.

 

Seawater Desalination Equipment Capacity

 

Model Capacity Recovery Rate Desalination Output power Membrane Brand SWRO Rack Size (mm)
SWRO-250 250L/H 50% 97% 1.5kw USA-DOW 1550*620*1670
SWRO-500 500L/H 50% 97% 1.5kw USA-DOW 1650*630*1800
SWRO-750 750L/H 50% 97% 2.5kw USA-DOW 1870*630*1850
SWRO-1000 1000L/H 50% 97% 2.5kw USA-DOW 1870*650*1850
SWRO-1500 1500L/H 50% 97% 3.0kw USA-DOW 2440*750*2000
SWRO-2000 2000L/H 50% 97% 3.5kw USA-DOW 2440*650*1750
SWRO-3000 3000L/H 50% 97% 4.0kw USA-DOW 2440*620*1850
SWRO-4000 4000L/H 50% 97% 5.0kw USA-DOW 2000*900*1800
SWRO-5000 5000L/H 50% 97% 7.5kw USA-DOW 2000*900*1800
SWRO-6000 6000L/H 60% 97% 9.5kw USA-DOW 3000*900*1800
SWRO-8000 8000L/H 60% 97% 13.5kw USA-DOW 3000*900*1800
SWRO-9000 9000L/H 60% 97% 14.0kw USA-DOW 3000*900*1800


Seawater Desalination Equipment Performance:

*Auto controller, RO membrane auto flush to protect membrane.
*Auto start when pure water tank have no water.
*Low pressure protection switch to protect high pressure pump when there is no raw water.
*High efficient and low noise high pressure pump.
*Product water conductivity meter to monitor product water quality all the time.
*Input water and output water pressure gauge to monitor RO membrane *differential pressure to remind it's time for chemical cleaning.
*Inlet water solenoid valve to stop water when machine is stop.

Seawater Desalination Equipment Component:

There are several kinds of consumables you need to replace regularly. (for 500LPH)
a. Quartz sand: replaced about every 15 months. 50kg/bag,100kg/set
b. Activated carbon: replaced about every 15 months. 25kg/bag, 25kg/set
c. Resin: replaced about every 15 months. 25L/bag, 50L/set


Seawater Desalination Equipment Processing

Process: raw water tank + raw water pump + quartz sand filter + activated carbon filter + water softener/chemical dosing system(optional) + security filter + high pressure pump + ro system + pure water tank + UV sterilizer(ozone generator) + precision filter + water supply point

 

Some parts function:

1. Raw water pump: provide needed pressure for every pre-treatment filter;
2. Quartz sand filter: use fiber glass as housing, fill quartz sand, it can filter big particles impurities, suspended substances, colloids etc. Important to remove iron and sediments you mentioned;^^
3. Activated carbon filter: use fiber glass as housing, fill activated carbon, remove color, odor, residual chlorine and organics substances;
4. Security filter: prevent large particles, bacteria, viruses into RO membrane, accuracy is 5µm;
5. High pressure pump: provide needed working pressure for RO system, ensure production capacity of pure water;
6. RO system: can remove particles, colloids, organic impurities, heavy metal ions, bacteria, virus, heat source etc. harmful substances and 99% dissolved salts.
7. Ozone generator(for bottled drinking): can continue to kill bacteria even water fill into bottled,viruses,cell damage,atc...

 

계약 4.0KW/H 4000LPD 해수 역삼투압 시스템 0

계약 4.0KW/H 4000LPD 해수 역삼투압 시스템 1

이 제품에 대한 자세한 내용을 알고 싶습니다
나는 관심이있다 계약 4.0KW/H 4000LPD 해수 역삼투압 시스템 유형, 크기, 수량, 재료 등과 같은 자세한 내용을 보내 주시겠습니까?
감사!
답변 기다 리 겠 습 니 다.